6000A Series

Overview

The Series 6000A Polymer Feeder includes an aging tank for improved polymer effectiveness. The tank volume is approximately one gallon. The Series 6000A is specifically designed for systems that have low polymer feed rates.

The polymer metering pump can be controlled manually, paced externally, or controlled by an external 4-20 mA signal. Standard polymer feed capacities range up to 48 gallons per day. Higher flows are also available upon request.

Dilution water flow capacity is up to 300 GPH. The EXCELL feeder is capable of operating on river, process or clean water. Standard units operate at water pressures between 30 and 100 psi. Higher flows are also available to fit your needs, with custom units operating up to 1500 psi.

A water flow switch is standard on all EXCELL feeders. The switch turns off the polymer metering pump whenever the water flow drops below minimum. The system automatically restarts when adequate water flow resumes.

Motor-less activation apparatus activates the polymer by injecting it into the water stream and immediately making the solution flow through a low pressure high energy polymer activation nozzle. The patented nozzle self-compensates for solution flow fluctuations. This assures that the polymer activation energy level remains adequate as solution flow changes.

An externally mounted polymer injection valve is accessible without disturbing the polymer activating apparatus. The valve spring is made of Hastelloy-C to minimize the possibility of stress corrosion cracking.

The sight glass allows the operator to quickly and easily see how the mixer is operating. The glass is self-cleaning and requires absolutely NO MAINTENANCE. When the polymer solution leaves the mixing chamber, its flow activates the patented cleaning assembly.

Designed to be maintenance-free. All components are modular and easily accessible. There are no parts to wear out, and no mixer motors to burn out.

All components are corrosion resistant. The support frame is made of welded stainless steel. The open design allows access to all components.

Portable and lightweight. The basic feeder weighs only 60 pounds. It operates at 120 VAC.

Details

Technical Information

  • The Series 6000A & 6000A2 feeders have a solenoid operaed diaphragm type metering pump.
  • The model 60XXA has a one gallon (4 liter) blending-aging tank.
  • The model 60XXA2 has the blending-aging tank and post dilution water flow.
  • The feeders operate with potable or filtered process dilution water at 30 to 100 psi (2 to 6.9 BAR).
  • The water flow switch stops the polymer pump when the water flow drops below minimum. The switch set point can be field adjusted.
  • The self-cleaning sight tube allows the operator to see how the feeder is operating. The patented assembly is operated by the polymer solution as it leaves the feeder.
  • The frame is made of welded stainless-steel. Frame dimensions are: 16″ x 18″ x 24″ tall.
  • The external injection valve is accessible without disturbing the activation apparatus. All components are modular and easy to access.
  • Operating voltage is 120 VAC. Power consumption is less than 5 Amps.
 

Available Options

  • Progressive cavity type polymer metering pump. See the Series 6000PC.
  • Solenoid water valve. Option “J”.
  • Motorized activation system.
  • Programmable pump, with digital display. It can accept a 4-20 mA signal. Option “S”.
  • H-O-A Switch to allow remote start-stop control.
  • Timer to allow a flush cycle.
  • Contacts for remote indication of Alarm, Pump Run, or Auto Mode.
  • Low polymer flow alarm. The switch uses a thermal dispersion type sensor, with no moving parts. The trip point is adjustable down to 10 GPD (1.6 LPH)
  • Voltages other than 120 VAC are available.
  • Custom designed to meet your needs.
Capacities

Capacities

 

6010A

Polymer Feed Rate
Water Flow Rate
0.4 to 10 GPD (0.06 to 1.6 LPH)
10 to 60 GPH (40 to 230 LPH)
 

6010A2

Polymer Feed Rate
Water Flow Rate
0.4 to 10 GPD (0.06 to 1.6 LPH)
10 to 120 GPH (40 to 460 LPH)
 

6024A

Polymer Feed Rate
Water Flow Rate
1 to 24 GPD (0.1 to 3.8 LPH)
20 to 150 GPH (75 to 570 LPH)
 

6024A2

Polymer Feed Rate
Water Flow Rate
1 to 24 GPD (0.1 to 3.8 LPH)
20 to 300 GPH (75 to 1140 LPH)
 

6048A2

Polymer Feed Rate
Water Flow Rate
2 to 48 GPD (0.2 to 7.6 LPH)
20 to 300 GPH (75 to 1140 LPH)
 
Downloads

Downloads

Document
Type
Notes
Product Brochure
PDF
General Layout Drawing
PDF