Series 6000
The Series 6000 Polymer Feeder provides the high energy needed to effectively activate all liquid polymers. The Series 6000A is specifically designed for systems that have low polymer feed rates. The Series 6000PC has a peristaltic metering pump. The pump is self priming and can run dry. The Series 6000PC has a progressive cavity metering pump. It is for systems that have high polymer feed rates or require the highest reliability.
The polymer metering pump can be controlled manually, paced externally, or controlled by an external 4-20 mA signal. Standard polymer feed capacities range up to 576 gallons per day. Higher flows are also available.
Dilution water flow capacity is up to 120 GPM. The EXCELL mixer was designed to use river, process, or clean water. Standard units operate with water at pressures of 30 to 100 psi. Higher flows are also available. Custom units can operate up to 1500 psi.
A water flow switch is standard on all EXCELL mixers. The switch turns off the polymer metering pump whenever the water flow drops below minimum. The system automatically restarts when adequate water flow resumes.
The sight glass is self-cleaning. The flow of the solution leaving the mixing chamber causes the patented cleaning assembly to operate continuously. The sight glass allows the operator to quickly and easily see how the mixer is operating.
An externally mounted polymer injection valve is accessible without disturbing the polymer activating apparatus. The valve spring is made of Hastelloy-C to minimize the possibility of stress corrosion cracking.
Motor-less mixing apparatus activates the polymer by injecting it into the water stream and immediately making the solution flow through a low pressure high energy polymer activation nozzle. The patented nozzle self-compensates for solution flow fluctuations. This assures that the polymer activation energy level remains adequate as solution flow changes.
Designed to be maintenance-free. All components are modular and easily accessed. There are no parts to wear out, and no mixer motors to burn out.
All components are corrosion resistant. The support frame is made of welded stainless steel. The open design allows access to all components.
Portable and lightweight. The basic feeder weighs only 60 pounds. It operates at 120 VAC.